Suche
 
Folgen Sie uns auf:

Clarification of Technical Disclosures as A Result of A Review By The British Columbia Securities Commission

25.07.2019  |  The Newswire

VANCOUVER, BC - TheNewswire July 25, 2019 - One World Lithium Inc. (OTCQB:OWRDF) (CNSX:OWLI.CN) (the "Company" or "OWL") announces that, as a result of a review by the British Columbia Securities Commission, the Company is issuing the following news release to clarify its disclosure.

Non-Compliant Disclosure of Exploration Information.

In the Company's June 18, 2019 and July 11, 2019 news releases, the following exploration information and Quality Assurance & Quality Control (QA/QC) was required to be fully disclosed.

Initial Drill Results

During this initial drilling campaign geochemical analysis and interpretation of geophysical results determined at least three target areas within the footprint of the geophysical survey. One target, a high conductivity zone, occurred at a depth of about 100 meters. Two other horizontal conductive zones occurred at depths of 300 and 500 meters, respectively. Accordingly, a drill program was designed to test the three targets, as well as other geochemical anomalies that were situated beyond the area of the geophysical survey.

Drilling conditions were difficult. Dense mudstones were interlayered with unconsolidated, water- and brine-bearing sands. Drill bits and related equipment were commonly plugged by the mudstones, requiring multiple trips out of the hole to clean and unplug the drill bits. Unconsolidated sands poured or sloughed into the drill bore, requiring substantial time to stabilize the drill hole before drilling to additional depths. Some measure of control was established by drilling and setting casing at deeper levels, but high amounts of water impeded the progress of the drill. As a result, only 5 holes were drilled and only the uppermost target of these drill holes was tested. The remaining 300 meter and 500 meter targets will need to be tested utilizing substantial casing or a different drill method. Nevertheless, drilling at the shallow target successfully demonstrate brines exist in the basin, albeit with only minor amounts of lithium contained in the brine. The Company is in active discussion with drilling companies to determine an appropriate drill methodology to test the deeper target zones. In spite of the lithologic and water issues, the drilling company consistently was able to stabilize the hole, enabling sampling of both rock samples and water/brine.

All holes were drilled vertical, and because salar sediments are horizontal, all samples are believed to approximate true thickness. Sediment and rock samples were collected at approximately 6 meter intervals and when water-bearing zones were encountered water samples were collected.

The water sample results contained nominal lithium results and of the 98 sediment samples taken all sediment samples assayed for anomalous lithium and potassium. Of the 98 sediment samples taken from the 5 drill holes the lithium grades ranged from a high of 273 ppm and a low of 7.3 ppm with an average of 47 ppm.

Drill Hole Location Map


Click Image To View Full Size

The following table lists the results from each drill hole.


Click Image To View Full Size

Table of results continued


Click Image To View Full Size

Table of results continued


Click Image To View Full Size

Table of results continued


Click Image To View Full Size

Quality Assurance & Quality Control

Drilling was conducted by Layne de Mexico S.A. de C.V, based in Hermosillo, Sonora, Mexico. A Schramm T-100 reverse circulation drill was used. Two supervisors and a full complement of drillers and drillers helpers conducted 24-hour drilling. All holes were vertical, and because salar sediments are horizontal, all samples are believed to approximate true thickness. Sediment and rock samples were collected at appropriate intervals from the drill rig cyclone, which separated rock from water. When water-bearing zones were encountered the hole was blown dry and any water in the bore hole was then blown to the surface for collection.

At each 6 meter interval, composite rock samples were collected in 10 mil plastic bags, marked with sample number, and sealed on site with zip ties.

Upon encountering an aquifer, water samples were collected in hard clear plastic 125 milliliter sample bottles. The samples were sealed, marked with an appropriate sample number, and sample numbers were further noted by metal tags and attached to the sample bottles with wire ties. The exact thickness of the aquifer varied from aquifer to aquifer within each hole, and between each of the drilled holes.

All samples were kept in San Felipe under the supervision of the Company's QP, and subsequently transferred by truck from San Felipe to Hermosillo. In Hermosillo, the samples were delivered by the QP to ALS Global's laboratory for preparation and shipping to Vancouver for analysis.

In Vancouver, brine samples were analyzed for lithium and 14 other related elements including boron, calcium, potassium, magnesium, and sodium. ALS Global's ME-ICP15, which incorporates atomic emission spectroscopy to determine the elemental contents of individual samples.

Rock and sediment samples were dried and prepped in Hermosillo, then sent to Vancouver for analysis utilizing ALS Global's ME-MS41L. The process utilizes aqua regia digestion followed by ICP-MS analysis (inductively coupled mass spectrometry) to determine amounts and ranges of a suite of elements, including lithium.

ALS Global is a worldwide laboratory, with principal offices for North America based in Vancouver, Canada. ALS Global is an ISO/IEC 17025:2005 certified laboratory, with similar levels of accreditation on every continent.

Because there is no readily available commercial geochemical standard for lithium brines, the Operator and the Company have relied upon the substantial and verifiable liquid and solid standards developed by ALS Global for quality control and quality assurance. Repeat and check samples are consistently within precision limits, and no drift has been experienced in the analysis of these samples.

John E. Hiner, SME Registered member and QP for this project, has verified the data disclosed. The QP was present during all drilling and sampling, retained possession of the samples throughout the program, and maintained sample security throughout the project, and is satisfied that the data resulting from the sampling program is representative of the conditions encountered in drill holes. The sampling was controlled and verified in the field by the QP. The analytical data from the field samples was tested and verified by detailed review of the ALS Global QA/QC data. Although the QP is confident that the data collected and analyzed fairly represents the geochemical and geological conditions at the project, the QP is actively searching for an independent lithium-in-brine standard to supplement and/or supplant the ALS QA/QC. It is possible, though not likely, that sample quality may have been impacted by both the difficult lithologies and the large amounts of both fresh water and brines encountered during drilling.

Potentially Misleading Disclosure

In the Company's October 17, 2018 and November 08, 2018 Proactive Investor videos posted on the company's website, the Company disclosed economic information about the project without a supportive mining study or established mineral resource in accordance with National Instrument 43-101. The Company has removed the October 17, 2018 video entirely from its website and deleted statements regarding economic information about the project from the November 08,

2018 video on its website.

About One World Lithium

One World Lithium Inc. is an exploration company focused on lithium in brine projects. It currently has earned a 60% property interest with an option to acquire a further 30% property interest for a total of a 90% property

interest in the 103,430 hectares (399 square mile) Salar del Diablo lithium brine project located in the State of California Baja, Mexico.

John E. Hiner, SME Registered member and a qualified person as defined by the Canadian National Instrument 43-101 has reviewed and approved the scientific and technical disclosure contained in this news release.

On behalf of the Board of Directors of One World Lithium Inc.,

"Douglas Fulcher"

President and Chief Executive Officer

For further information please visit www.oneworldlithium.com or email info@oneworldlithium.com or call 1-888-280-8128.

Forward-Looking Information: This press release may include forward looking information within the meaning of Canadian securities legislation. Forward looking information is based on certain key expectations and assumptions made by the management of the OWL, including the intention of OWL to proceed with the advancement of the Property. Although OWL believes that the expectations and assumptions on which such forward looking information is based are reasonable, undue reliance should not be placed on the forward-looking information because OWL can give no assurance that they will prove to be correct. Forward looking statements contained in this press release are made as of the date of this press release. OWL disclaims any intent or obligation to update publically any forward-

looking information, whether as a result of new information, future events or results or otherwise, other than as required by applicable securities laws. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from the those anticipated in such statements, important factors that could cause actual results to differ materially from the company's expectations include: (I) inability of OWL to execute its business plan and raise the required financing (II) accuracy of mineral or resource exploration activity (III) continued access to mineral property and (IV) risks and market fluctuations common to the mining industry and lithium sector in particular. The reader is cautioned that assumptions used in the preparation of any forward-

looking information may prove to be incorrect. Events or circumstances may cause actual results to differ materially from those predicted, as a result of numerous known and unknown risks, uncertainties, and other factors, some of which are beyond the control of the OWL. The reader is cautioned not to place undue reliance on any forward-looking information contained in this press release.

Neither the Canadian Securities Exchange nor its Market Regulator (as that term is defined in the policies of the Canadian Securities Exchange) accepts responsibility for the adequacy or accuracy of this release.

Copyright (c) 2019 TheNewswire - All rights reserved.


Bewerten 
A A A
PDF Versenden Drucken

Für den Inhalt des Beitrages ist allein der Autor verantwortlich bzw. die aufgeführte Quelle. Bild- oder Filmrechte liegen beim Autor/Quelle bzw. bei der vom ihm benannten Quelle. Bei Übersetzungen können Fehler nicht ausgeschlossen werden. Der vertretene Standpunkt eines Autors spiegelt generell nicht die Meinung des Webseiten-Betreibers wieder. Mittels der Veröffentlichung will dieser lediglich ein pluralistisches Meinungsbild darstellen. Direkte oder indirekte Aussagen in einem Beitrag stellen keinerlei Aufforderung zum Kauf-/Verkauf von Wertpapieren dar. Wir wehren uns gegen jede Form von Hass, Diskriminierung und Verletzung der Menschenwürde. Beachten Sie bitte auch unsere AGB/Disclaimer!




Mineninfo
One World Lithium Inc.
Bergbau
A2JB40
CA68248A1066
Minenprofile
Alle Angaben ohne Gewähr! Copyright © by GoldSeiten.de 1999-2024.
Die Reproduktion, Modifikation oder Verwendung der Inhalte ganz oder teilweise ohne schriftliche Genehmigung ist untersagt!

"Wir weisen Sie ausdrücklich auf unser virtuelles Hausrecht hin!"